Auto lift machine manufacturers introduced the installation fixture method four wheel aligner
2015/7/27 view:
Auto lift machine manufacturers introduced the installation fixture method four wheel aligner:
According to the size of the wheel measuring vehicle to adjust fixture. First adjust the position of the two nylon jaw to the right size, and then adjust the length of the two cards. First under the two nylon claw at the top of the outer edge of the rim bulges, then re released above nylon claw knob, adjust its position, the top is also on the outer edge of the rim bulges, then tighten the knob. The next step is with both hands while promoting fixture rod, the clamping arm to card in the round lines, and then hung on the safety hook, check fixtures is securely installed.
According to the size of the wheel measuring vehicle to adjust fixture. First adjust the position of the two nylon jaw to the right size, and then adjust the length of the two cards. First under the two nylon claw at the top of the outer edge of the rim bulges, then re released above nylon claw knob, adjust its position, the top is also on the outer edge of the rim bulges, then tighten the knob. The next step is with both hands while promoting fixture rod, the clamping arm to card in the round lines, and then hung on the safety hook, check fixtures is securely installed.
- Pre：None
- Next：Auto lift machine manufacturer 2015/7/27
